Filter
Top Products
-
7
-
C
HAPTER
2
H
ARDWARE
I
NSTALLATION
2.1 Connecting Your Camera to LAN
Step 1 Assemble and attach the provided wall mount kit to the camera.
Step 2 Connect one end of the provided Ethernet cable to the camera and connect the other end to one
of the LAN ports on your router or switch.
Step 3 If your router or switch does not support Power over Ethernet function, you will need to provide
power to the camera by connecting the supplied power adapter. If you are connecting the camera to a
PoE switch/router, you do not need to connect the power adapter.
Step 4 Please verify the LED status on the front panel and make sure it is on and ready for use now.
Power LED: Solid Amber
Link LED: Flashing Green
Step 5 Please proceed to Chapter 3 for camera configuration.