Filter
Top Products
-
60
-
Setting up Event Server
Click the button and select Event Server to configure the SMTP server, so that you can send emails
that include still images as notification.
Select the Enable SMTP option to start the email service of the system. When you enable the service,
you have to complete the following settings.
SMTP Server Address: Enter the mail server address.
For example, mymail.com.
Sender Email Address: Enter the email address of the user who will send the email. For example,
John@mymail.com.
Authentication Mode: Select None or SMTP according to the mail server configuration.
Sender User Name: Enter the user name to login the mail server.
Sender Password: Enter the password to login the mail server.
Port Number: Enter the port number used for the email server.
SSL: If the mail server requires an encrypted connection, you should check the SSL option.
When completed, click Save and then select OK. The system will automatically start the Event Service.
TIP The status of Event Service is indicated by the icon in the system bar.