Allied International GX1660 Digital Camera User Manual


 
GX1660 User Manual
70-0057A-A
Allied Vision Technologies (Canada) Inc.
1
Introduction
The GX1660 series of cameras are sensitive, 66 frames per second, 2 megapixel, Gigabit
Ethernet
cameras based on the Kodak KAI-02050 CCD sensor. These cameras support the use
of 1 or 2 gigabit Ethernet ports in a lag configuration for higher bandwidth requirements.
Precautions
READ INSTALLATION GUIDE CAREFULLY.
This document contains specific information which is necessary for the correct operation and
treatment of this product.
DO NOT OPEN THE CAMERA. WARRANTY IS VOID IF CAMERA IS OPENED.
This camera contains sensitive components which can be damaged if handled incorrectly.
KEEP SHIPPING MATERIAL.
Poor packaging of this product can cause damage during shipping.
VERIFY ALL EXTERNAL CONNECTIONS.
Verify all external connections in terms of voltage levels, power requirements, voltage polarity,
and signal integrity prior to powering this device.
CLEANING.
This product can be damaged by some volatile cleaning agents. Avoid cleaning the image sensor
unless absolutely necessary. Please see instructions on sensor cleaning in this document.
DO NOT EXCEED ENVIRONMENTAL SPECIFICATIONS.
See environmental specifications limits in the Specifications section of this document.
Warranty
AVT Canada Inc. provides a 2 year warranty which covers the replacement and repair of all parts
which are found to be defective in the normal use of this product. AVT Canada Inc. will not
warranty parts which have been damaged through the obvious misuse of this product.