American Dynamics 8200-0181-03 Security Camera User Manual


 
SPEEDDOME OPTIMA LT PROGRAMMABLE DOME CAMERA 8200-0181-03, REV. C
QUICK REFERENCE GUIDE 4 of 8
Supported Controllers and Matrix Switching Systems
SpeedDome Optima LT may be used with the following controllers and matrix switching systems. See notes below for specific limitations or
restrictions.
Feature
ADTT16E
Series
VM32 / AD32
Series
VM96 Series AD2150 /
AD2350
(1)
MegaPower
LT
MegaPower
48
(1)
AD1650
(2)
AD168/
MegaPower
168 (1)
AD2050
(1)
MegaPower
1024
(1)
Supported
Protocols
SensorNet SensorNet SensorNet
RS-422 (2)
Manchester SensorNet Manchester
SensorNet
RS422 (8)
Manchester
RS422 (9)
Manchester
SensorNet
RS422 (9)
Manchester
RS422 (9)
Manchester
RS422 (9)
Maximum
Available
Presets
96 96
Unlimited (3)
0 RS422 (2)
64 Manchester
60 RS422 (9)
96
64 Manchester
96 SensorNet
96 RS422 (8)
64 Manchester
60 RS422 (9)
64 Manchester
64 SensorNet
60 RS422 (9)
64 Manchester
60 RS422 (9)
64 Manchester
60 RS422 (9)
Maximum
Available
Patterns
(4)
3 3 3 (2) 3 3 3 3 3 3 3
DirectSet
menu (5)
Yes (6) No No No Yes (7) Yes (7) No No No No
NOTES:
(1) For the list of compatible keyboards, see Supported AD Keyboards on page 5.
(2) VM96 performance is limited under 2-wire RS422 simplex. Patterns and presets are not supported in RS422 simplex mode.
(3) Preset information is stored at the host, not the dome. For SensorNet and RS422 duplex, unlimited presets are supported.
(4) Patterns are limited by time and the number of available dome commands. Total time for each pattern cannot exceed 6 minutes 50 seconds.
The total number of dome commands used in the patterns cannot exceed 99.
(5) Although text overlay is not supported, the following DirectSet menu commands are supported: Return to Auto Iris/Focus, Flip, Peel and Dome
Reset. See DirectSet Menu Commands on page 3 for more information.
(6) Requires firmware version 0701-2833-0103 (EEPROM) / 0701-2834-0201 (Flash) or newer.
(7) Requires a compatible keyboard with a DirectSet key (ADCC0200 or ADCC0300).
(8) 2-wire RS422 simplex mode to be supported with the MegaPower 48+ firmware upgrade.
(9) 2-wire RS422 simplex mode to be supported with AD2083-02C code translator firmware upgrade.