Filter
Top Products
SPEEDDOME OPTIMA LT PROGRAMMABLE DOME CAMERA 8200-0181-03, REV. C
QUICK REFERENCE GUIDE 7 of 8
AD168/MegaPower 168 Matrix
Switcher/ Controller System
See Supported AD Keyboards on page 5 for
button names used on specific keyboards.
Dome Function Keyboard Command
Define Pattern # 1
121 - F2
Define Pattern # 2
122 - F2
Define Pattern # 3
123 - F2
End Pattern Definition
120 - F2
Save New Pattern
130 - F2
Go to Pattern # 1
31 - F1
Go to Pattern # 2
32 - F1
Go to Pattern # 3
33 - F1
Run Pattern # 1
21 - F1
Run Pattern # 2
22 - F1
Run Pattern # 3
23 - F1
Auto Repeat Pattern # 1
41 - F1
Auto Repeat Pattern # 2
42 - F1
Auto Repeat Pattern # 3
43 - F1
Clear Pattern # 1
(SpeedDome RS-422)
131 - F2
Clear Pattern # 2
(SpeedDome RS-422)
132 - F2
Clear Pattern # 3
(SpeedDome RS-422)
133 - F2
Flip (Rotate dome 180º)
19 - F1
Reset Iris
20 - F1
Return to Auto Iris / Auto
Focus
69 - F1
Reset Dome
30 - F1
Enter Vertical Phase
Adjust Mode
38 - F2
Exit Vertical Phase Adjust
Mode
39 - F2
In addition, the following commands are not
supported:
• Set Auxiliary 4 OFF (70-F1)
• Set Auxiliary 4 ON (71-F1)
Manchester Commands
These commands are supported by systems using
the Manchester protocol.
See Supported AD Keyboards on page 5 for
button names used on specific keyboards.
Verified with AD2050, AD2091, and AD168 with CCM
(v. 3.01)
Dome Function Keyboard Command
Program Presets 1 - 64
1- 64 Set Preset
Call Presets 1 - 64
1- 64 Call Preset
Program Pattern 1
70 Set Preset
Program Pattern 2
71 Set Preset
Program Pattern 3
72 Set Preset
Save Pattern
Programming
69 Set Preset
Cancel Pattern
Programming
68 Set Preset
Repeats following pattern
69 Call Preset
Run Pattern 1
70 Call Preset
Run Pattern 2
71 Call Preset
Run Pattern 3
72 Call Preset
Reset Dome
65 Set Preset
Resume Auto Focus / Auto
Iris
66 Call Preset
Flip (Rotate dome 180º)
67 Call Preset
Activate / Deactivate
V-phase delay setting
adjustment
67 Set Preset