Filter
Top Products
4
CAUTION
It is recommended that the eyecup be replaced with the eye-
guard during weapon-mounted use.
NOTE
The ATN NVM-14 is not a weapon sight, however, it can be
used in conjunction with a collimated dot sight or laser aiming
device.
C. MOUNTING THE ATN NVM-14 TO THE WEAPON
To mount the ATN NVM-14 perform the following:
1. Loosen the clamping knob on the weapon mount. Position the
monocular mount on the weapon’s mounting rail, adjust the
fore/aft position of the monocular as necessary by loosening
the clamping knob and repositioning the weapon mount on the
rail. Tighten by turning the clamping knob).
2. Align the monocular and the weapon mount. Slide the monoc-
ular rearwards until the alignment boss aligns with the align-
ment groove on the weapon mount. Push until the monocular
locks into the weapon mount (see figure 3-1).
Figure 3-3
Attaching ATN NVM-14 to Weapon Mount