Filter
Top Products
5
D. MOUNTING THE ATN NVM-14 TO A SCOPE
Day/Night System may be mounted with Flip-up Scope Adapter
Mount for NVM-14 and variety of daytime scopes/telescopes.
1. Loosen the adapter fixing screws (A).
2. Put the insert into the adapter (ATN supplies inserts of differ-
ent sizes for their coupling with 38 mm to 43 mm eyepieces).
3. Now attach the monocular to the bracket (B). You can push
the monocular rail into the bracket guide (C) and then take it off
the bracket only when you loosen the fixation knob (D) holding
the button (2) pressed at a time. With the fixation knob (D) tight-
ened you secure the monocular on the bracket.
4. Push a daytime riflescope eyepiece into the adapter attached
to the monocular, making sure a small space is left between the
riflescope eyepiece and the monocular front lens.
5. Tighten the adapter screw(A) securely.
6. By pressing button (F) on the adapter you can raise the
monocular 180 degrees upward in order to work with the day-
time scope only.
Figure 3-4
Mounting the ATN NVM-14 to a scope
BA
C
D
E
F