Filter
Top Products
7
G. MOUNTING CAMERA/CAMCORDER TO THE
ATN NVM-14
1. Screw Camera Adapter into the front lens of a photographic
camera (thread M52x0.75) or a video camera (use adaptor ring
threaded M37x0.75).
2. Remove the rubber eyecup off the monocular.
3. Connect the adapter with the eyepiece and tighten 3 fixing
screws on the adapter.
H. MOUNTING IR-450 TO THE ATN NVM-14
IR-450 may be mounted on the monocular through the Picatinny
adapter.
1. Install the Picatinny Adapter on one of the monocular rails
(See cl. 3.4.F).
2. Loosen the IR-450 fixing screw.
3. Mount the IR-450 on the Picatinny Adapter and tighten the
fixing screw.
I. MOUNTING THE ATN NVM-14 TO THE PVS-7
HEAD/HELMET MOUNT
To mount the ATN NVM-14 to a head/helmet mount, perform the
following:
1. Attach the PVS- 7 headmount adapter (A) to the rail (B) of
ATN NVM-14.
Figure 3-7
Attaching ATN NVM-14 to PVS-7 Adapter
A
B
C
D
E