Filter
Top Products
NetBotz Camera Pod 160 Installation Manual
7
Install the NetBotz 160
Choose an installation option that meets your needs. Once installed, use the 5-m
(16.4-ft) USB cable to connect the NetBotz 160 to your NetBotz Rack Monitor
450, NetBotz Rack Monitor 550, or NetBotz Room Monitor 455.
Note: Mounting the NetBotz 160 inside a rack requires the Rack
Mounting Kit (NBES0302).
Electrical box
Wall
Note: Drill 4.76-mm (3/16-in) pilot holes for wall anchors.
Caution: Do not overtighten the screws.