Filter
Top Products
NetBotz Camera Pod 160 Installation Manual
9
Enclosure
Note: Use a #32 drill to make four 2.94-mm (0.116-in) pilot holes.
Connect Optional Devices
As applicable, install the options listed below, then connect them to the back of
the NetBotz 160.
• Door Switch Sensor for APC Racks (NBES0303) or Door Switch Sensor
for Rooms of Third-Party Racks (NBES0302)
• External microphone
• Set of speakers
Note: If the cable of a Door Switch Sensor for APC Racks is
not long enough, use an RJ-45 coupling provided with the
sensor to extend the cable up to 15 m (50 ft).