Filter
Top Products
NetBotz Camera Pod 160 Installation Manual
1
Introduction
Product description
The American Power Conversion (APC
®
) NetBotz
®
Camera Pod 160 is a
motion-sensitive camera capable of sending image data through a USB
connection to a Rack Monitor 450, Rack Monitor 550, or Room Monitor 455.
The NetBotz 160 can be triggered remotely by the appliance in response to a
number of environmental alarms or events, such as a temperature spike or the
action of opening a door. The NetBotz 160 can also provide constant
surveillance of an area or entrance.
The NetBotz 160 includes the following features:
• Image processor that generates images up to 1280 x 1024 resolution,
24-bit color, and up to 30 frames per second.
Note: The maximum frame rate describes the maximum
number of images that the camera imager is capable of
producing each second. The actual frame rate is dependent on
the amount of available bandwidth and current resolution.
• Image Size: 7.7 mm x 6.1 mm (9.82 mm diagonal = 0.387 in).
• Field of View: 64º (H) x 53º (V) for all resolutions.
• User adjustable and switchable industry-standard CS-mount lens.
CS-mount permits access to hundreds of different general purpose and
special purpose lenses.
• Microphone jack (standard 3.5-mm miniplug), which provides the ability
to monitor and capture monophonic audio from the location in which the
NetBotz 160 is installed.
• Speaker/headphone jack (standard 3.5-mm stereo miniplug) that can be
used with unpowered headphones or powered speakers to provide
monophonic audio output.
• An optional door switch sensor (NBES0302 or NBES0303) can be used
to trigger image capture when someone opens a monitored entryway or
other door, such as a cabinet or closet.