Filter
Top Products
16 Installing SG203 and SG208 Security Gateway March 2004
Avaya SG203/SG208 Security Gateway Hardware Installation Guide
Table 4 Electrical specifications
Equipment requirements
The security gateway devices shipping carton should contain:
To install and use the security gateway in a typical network, the customer
must supply the following:
• Router, DSL, cable or ISDN modem, providing connectivity to a WAN
such as the Internet
• A workstation on the LAN to communicate with the security gateway,
installed with a Java-enabled (JDK1.1.8 or later), 128-bit encryption-
capable browser, either Internet Explorer 5.5 or later or Netscape 6.2
or later.
Physical installation
The security gateway can be placed on a desktop or mounted in a rack. It
is easy to install and requires a screwdriver for rack mounted devices.
Voltage 100-240 VAC
Input frequency 47-63 Hz
AC input current 3.5 Amps
• 1
Security Gateway
• 2
Cat5e cables
• 1
Power supply
• 1
Null modem cable for console connection
• 1
Rack mount kit including two mounting
brackets and screws for attaching the brackets
to the security gateway.
Hardware required to mount the unit to the
rack must be provided by the customer.
• 1
Quick Start Guide