Filter
Top Products
24
AXIS 210/210A/211/211A - Audio (AXIS 210A/211A only)
Audio (AXIS 210A/211A only)
The AXIS 210A/211A can transmit audio to other clients using an external microphone
and can play audio received from other clients by attaching a speaker. The Setup page for
the AXIS 210A/211A has an additional menu item called Audio, which allows different
audio configurations to be set up, e.g. full duplex, half duplex and simplex.
Note: The speaker attached to the audio output of the AXIS 210A/211A must have a built-in amplifier, e.g. some
PC speakers.
An example of a network using AXIS 210A/211A cameras to transmit audio and video across the network.
Audio Settings
This section describes how to configure the basic audio settings for the AXIS 210A/211A,
e.g. set the communication mode and adjust the sound levels in the microphone and
speaker connected to the camera.
Enable Audio
Check this box to enable audio in the AXIS 210A/211A.
Audio Channels
There are two mono audio channels between the AXIS 210A/211A and other clients, one
for receiving audio and one for transmitting audio. Each audio channel can be turned on
or off, which means that there are four audio mode options that can be used.
TCP/IP Network
AXIS 210A/211A
Client PC
AXIS 210A/211A
AXIS 210A/211A