Filter
Top Products
50
AXIS 210/210A/211/211A - Technical Specifications
Processors, memory, clock • CPU: ETRAX 100LX 32bit
• Video processing and compression: ARTPEC-2
• RAM memory: 16 MB (AXIS 210/211) 32 MB (AXIS 210A/211A)
• Flash memory: 4 MB (AXIS 210/211) 8 MB (AXIS 210A/211A)
• Battery backed up real-time clock
Power • 7-20V DC, max 5W
• Power over Ethernet (IEEE 802.3af), power classification Class 0 (AXIS 211) or
Class 2 (AXIS 210A/211A) (max 6.49 W)
Operating conditions
• Temperature: +5
o
C to +45
o
C (41
o
F to 113
o
F)
• Humidity: 20-80% RH.
Audio (AXIS 210A/211A) • Full-duplex, half-duplex, simplex or no audio
• Encoding formats (selected under System Options):
ADPCM format at 24kbps, 8 kHz sampling (G.726 - select G723 from
drop-down list)
ADPCM format at 32kbps, 8 kHz sampling (G.726 - select G721 from
drop-down list)
PCM µ−law format at 64kbps, 8 kHz sampling (G.711 default)
• Built-in microphone with adjustable input sensitivity (low/high).
• External audio input: Single 3.5mm input for a mono microphone, or line-in
mono signal (left channel is used from a stereo signal).
• Microphone input sensitivity: High = max -38 dBu (28 mVpp), Low = max -18
dBu (270 mVpp)
• Line input: max: 11.2 dBu (8.0 Vpp)
• DC power through input connector for external microphones supported.
• Audio output (line level) connects to PA system or active speaker with built-in
amplifier. Headphones can also be connected. A stereo connector must be used
for the audio out.
• Audio output: max 3.0 Vpp (+2.7dBu)
• Audio output impedance: min 32 ohm
Installation, management and
maintenance
• Installation tool on CD, web-based configuration
• Configuration backup and restore
• SNMP support (AXIS 210A/211A only)
• Firmware upgrades over HTTP or FTP, firmware available at www.axis.com
Video access from
Web browser
• Camera live view
• Sequence tour capability for up to 20 Axis cameras
• Customizable HTML pages
Minimum web browsing
requirements
• Pentium III CPU 500 MHz or higher, or equivalent AMD
• 128 MB RAM
• AGP graphic card, Direct Draw, 32 MB RAM
• Windows XP, 2000, NT4.0*, ME* or 98* (* Motion JPEG only)
• DirectX 9.0 or later
• Internet Explorer 6.x or later
For other operating systems and browsers, see www.axis.com/techsup
Item Specification