Axis Communications 223M Digital Camera User Manual


 
53
AXIS 223M - Unit Connectors
Power connections
Power can be supplied to the camera by the following methods:
The supplied power adapter, PS-K, 9W. The center pin is positive (+).
Power over Ethernet (PoE) with power classification Class 2, via the network
cable. This will automatically be detected if available via the network.
The power connector block on the rear panel.
Power connector block
The power connector block supports both AC and DC input power.
The DC supply is 7-24V. Connect the negative pole to the GND pin and the positive pole to
the DC+ pin.
The AC supply is 10-24V. Connect the AC poles to the AC pins.
Schematic diagram - Power terminal block and Power connectors
Power connector block pin assignment table.
Pin Function
GND Ground/DC-
AC/DC+ AC and DC+, power input for mains power to unit
AC AC power input for mains power to unit
AC AC
DC+
GND
3
2
o
o
Mode
Power
Supply
3.3V
z
z
zz
z
z
z
z
z
z
o
o
Internal
~
Switch
o
z
GND
AC
1
AC/DC+
GND/DC-
=
+
-
Axis Power Supply
PS-K 9V max 9W or
according to parts list