Axis Communications a1001 Security Camera User Manual


 
hardware configuration pages. Use the generated hardware
pin chart. Make sure the product is disconnected from
power (PoE/DC) while connecting devices to the product.
• For information about how to connect other wires, such as
power wires to locks, readers and other devices, see the
manufacturers’ instructions.
Transportation
• When transporting the Axis product, use the original
packaging or equivalent to prevent damage to the product.
Battery
The Axis product uses a 3.0 V CR2032 lithium battery as the
power supply for its internal real-time clock (RTC). Under
normal conditions this battery will last for a minimum of five
years.
Low battery power affects the operation of the RTC, causing
it to reset at every power-up. A log message will appear
when the battery needs replacing.
The battery should not be replaced unless required, but if the
battery does need replacing, contact Axis support at
www.axis.com/techsup/ for assistance.
• Risk of explosion if the battery is incorrectly replaced.
• Replace only with an identical battery or a battery which is
recommended by Axis.
• Dispose of used batteries according to local regulations or
the battery manufacturer's instructions.