Filter
Top Products
Page 6 AXIS 207/207W/207MW Installation Guide
Connection diagram
LED indicators
LED Color Indication
Wireless Unlit Wired mode.
Green Steady for connection to a wireless network. Flashes for network activity.
Red Steady for no wireless network connection. Flashes when scanning for wireless
networks.
Network Green Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Amber Steady for connection to 10 Mbit/s network. Flashes for network activity.
Unlit No wired network connection, or AXIS 207MW/AXIS 207W in wireless mode.
Status Green Steady green for normal operation.
Note: The Status LED can be configured to be unlit during normal operation, or to
flash only when the camera is accessed. To configure, go to Setup > System
Options > LED settings. See the online help files for more information.
Amber Steady during startup, during reset to factory default or when restoring settings.
Red Slow flash for failed upgrade.
Power Green Normal operation.
Amber Flashes green/amber during firmware upgrade.
o
z
z
o
o
o
oo
Camera
3.3V
Power - see table above.
e.g. pushbutton
Device
z
4
o
3
o
Linear
Power
Supply
o
1
o
o
Relay
GND
+
2
Fuse
IMPORTANT!
This diagram applies to the AXIS
207W and AXIS 207MW. The AXIS
207 has a different pinout and
power - see the table above.
2
1
z
Fuse:
AXIS 207: 500mA
AXIS 207W/MW: 1A