Filter
Top Products
AXIS Q6042–S PTZ Dome Network Camera
Events
Events
The Axis product can be congured to perform actions when different events occur, for example, start a recording when motion is
detected. The set of conditions that denes how and when the action is triggered is called an Action Rule.
Available action rule triggers and conditions include:
• Applications – Use installed applications to trigger the rule. See Applications, on page 36.
• Detectors
- Live Stream Accessed – Trigger the rule when any stream is accessed and during edge storage playback.
This can for example be used to send notications.
- Motion Detection – Trigger the rule when motion is detected. See Motion Detection, on page 34.
- Shock Detected – Trigger the rule when the Axis product detects it has been tilted or hit. See Shock Detection,
on page 34.
• Hardware
- Heater – Trigger the rule if the heater is malfunctioning. This can for example be used to send maintenance
notications.
- Network – Trigger the rule if network connection is lost or restored. This can for example be used to start
recording to the SD card.
- Temperature – Trigger the rule if the temperature falls outside or inside the operating range of the product. This
can for example be used to send maintenance notications.
• Input Signal
- Digital Input Port – Trigger the rule when an I/O port receives a signal from a connected device. SeeI/O Ports,
on page 54.
- Manual Trigger – Trigger the rule using the Manual Trigger button in the Live View page. SeeControls on
the Live View Page, on page 13. This can for example be used to validate actions during product installation
and conguration.
- Virtual Inputs – can be used by a VMS (Video Management System) to trigger actions. Virtual inputs can, for
example, be connected to buttons in the VMS user interface.
• PTZ
- Autotracking – Trigger the rule when autotracking starts or stops. SeeAutotracking, on page 30.
- Error – Trigger the rule if the PTZ functionality is not working correctly. This can for example be used to
send maintenance notications.
- Moving – Trigger the rule when the camera view moves due to a PTZ operation. This can for example be used
as an additional condition to prevent an action rule triggered by motion detection to record video while the
camera view moves due to a PTZ operation.
- Preset Reached – Trigger the rule when the camera stops at a preset position. This can be for example be used
with the Send Images action to upload images from the preset position.
- Ready – Trigger the rule when the PTZ functionality is ready to be used. This can for example be used to steer
the camera to a specic preset position when the product is started.
• Storage
38