AXIS P1357–E Network Camera
Technical Specications
Power connector
DC power input
2-pin terminal block for power input.
Audio connector
3.5 mm audio connectors
123
Audio Input
Audio Output
1 Tip
Microphone/Line in
2 Ring
Line out (mono)
3 Sleeve Ground Ground
RS-485/422 connector
Two 2-pin terminal blocks for RS-485/RS-422 serial interface. The serial
port can be congured to support:
• Two-wire RS-485 half duplex
• Four-wire RS-485 full duplex
• Two-wire RS-422 simplex
• Four-wire RS-422 full duplex point to point communication
Rx/Tx Tx
4 3 2 1
Function Pin Notes
RS-485/RS-422 TX (A)
1
RS-485/RS-422 TX (B)
2
TX pair for RS422 and 4–wire RS-485
RS-485A alt RS–485/422 RX
(A)
3
RS-485B alt RS-485/422 RX
(B)
4
RX pair for all modes (combined RX/TX for 2–wire RS-485)
Performance Considerations
When settings up your system, it is important to consider how various settings and situations will affect performance. Some factors
affect the amount of bandwidth (the bit rate) required, others can affect the frame rate, and some affect both. If the load on the
CPU reaches its maximum, this will also affect the frame rate.
The following factors are among the most important to consider:
• High image resolution and/or lower compression levels result in images containing more data. Bandwidth affected.
• Access by large numbers of Motion JPEG and/or unicast H.264 clients. Bandwidth affected.
• Simultaneous viewing of different streams (resolution, compression) by different clients. Effect on frame rate and
bandwidth.
64