Filter
Top Products
AXIS P3904–R Network Camera
Events
The recording Duration of some actions can be set to include time immediately before and after the event. Select Pre-trigger time
and/or Post-trigger time and enter the number of seconds. When While the rule is active is enabled and the action is triggered
again during the post-trigger time, the recording time will be extended with another post-trigger time period.
For more information, see the online help
.
Fallback Action
A fallback action is started if the primary action cannot be started, for example if connection to a recipient cannot be established.
Fallback actions are typically used to send email notications on failed actions or to upload images to a secondary recipient.
Recipients
Recipients receive media les and notication messages. The following recipients are available:
Recipient Use with action
Email
1
Send Images
Send Notication
Send Video Clip
FTP
Send Images
Send Video Clip
HTTP
Send Images
Send Notication
Send Video Clip
HTTPS Send Images
Send Notication
Send Video Clip
Network Share
2
Send Images
Send Video Clip
TCP Send Notication
1. Some email providers have security lters that prevent users from receiving or viewing large amount of attachments, from receiving scheduled
emails and similar. Check the email provider’s security policy to avoid delivery problems and locked email accounts.
2. A network share can also be used as a storage device for recorded video. Go System Options > Storage to congure a network share before
setting up a continuous recording or an action rule to record video. See Storage on page 44 for more information about storage devices.
To add a recipient:
1. Go to Events > Recipients and click Add.
2. Enter a descriptive name.
3. Select a recipient Type.
4. Enter the information needed for the recipient type.
5. Click Test to test the connection to the recipient.
6. Click OK.
33