Filter
Top Products
Legal Considerations
Video and audio surveillance can be regulated by
laws that vary from country to country. Check the
laws in your local region before using this product
for surveillance purposes.
Liability
Every care has been taken in the preparation of this
document. Please inform your local Axis ofce of
any inaccuracies or omissions. Axis Communications
AB cannot be held responsible for any technical or
typographical errors and reserves the right to make
changes to the product and manuals without prior
notice. Axis Communications AB makes no warranty
of any kind with regard to the material contained
within this document, including, but not limited to,
the implied warranties of merchantability and tness
for a particular purpose. Axis Communications AB
shall not be liable nor responsible for incidental
or consequential damages in connection with the
furnishing, performance or use of this material. This
product is only to be used for its intended purpose.
Intellectual Property Rights
Axis AB has intellectual property rights relating to
technology embodied in the product described in this
document. In particular, and without limitation, these
intellectual property rights may include one or more
of the patents listed at www.axis.com/patent.htm and
one or more additional patents or pending patent
applications in the US and other countries.
Equipment Modications
This equipment must be installed and used in
strict accordance with the instructions given in
the user documentation. This equipment contains
no user-serviceable components. Unauthorized
equipment changes or modications will invalidate
all applicable regulatory certications and approvals.
Trademark Acknowledgments
AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC
and VAPIX are registered trademarks or trademark
applications of Axis AB in various jurisdictions. All
other company names and products are trademarks or
registered trademarks of their respective companies.
Regulatory Information
Europe
This product complies with the applicable
CE marking directives and harmonized standards:
• Electromagnetic Compatibility (EMC)
Directive 2004/108/EC. See Electromagnetic
Compatibility (EMC)on page 2 .
• Low Voltage (LVD) Directive 2006/95/EC. See
Safety onpage 3 .
• Restrictions of Hazardous Substances (RoHS)
Directive 2011/65/EU. See Disposal and
Recycling onpage 3.
A copy of the original declaration of conformity
may be obtained from AxisCommunications AB. See
ContactInformationonpage 3.
Electromagnetic Compatibility (EMC)
This equipment has been designed and tested to fulll
applicable standards for:
• Radio frequency emission when installed
according to the instructions and usedin its
intended environment.
• Immunity to electrical and electromagnetic
phenomena when installed according to
the instructions and used in its intended
environment.
USA
This equipment has been tested using a shielded
network cable (STP) and found to comply with the
limits for a Class B digital device, pursuant to part 15
ofthe FCC Rules. Theselimits are designed to provide
reasonable protection against harmful interference in
a residentialinstallation. This equipment generates,
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmfulinterference to radio
communications. However, thereis no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmfulinterference
to radio or television reception, which can be
determined by turning theequipment off and on, the
user isencouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between theequipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from thatto which the receiver
is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
The product shall be connected using a shielded
network cable (STP) that is properly grounded.
Canada
This Class B digital apparatus complies with Canadian
ICES-003. The product shall be connected using
a shielded network cable (STP) that is properly
grounded.
Cet appareil numérique de laclasse B estconfome à
la norme NMB-003 du Canada. Le produit doitêtre
connecté à l'aide d'un câble réseau blindé (STP) qui
est correctement mis à la terre.
Europe
This digital equipment fullls the requirementsfor RF
emission according to the Class B limit of EN 55022.
The product shall be connected using a shielded
network cable (STP) that is properly grounded.
This product fullls the requirements for immunity
according to EN 61000-6-1 residential, commercial
and light-industrial environments.
This product fullls the requirements for immunity
according to EN 61000-6-2 industrial environments.