Filter
Top Products
AXIS T90B Series
• Remote Control (optional accessory)
- Press the STATUS button to check the status of the
remote control, see LED Status Indicators.
- Programming may be disabled. Turn the illuminator
power off for at least 10 seconds and then turn the
power on to enter Programming Mode.
- In bright sunlight conditions, the distance between
the remote control and the illuminator may need
to be reduced.
- Check the battery on the remote control (CR2025),
replace if necessary.
- Make sure no other strong Infra-Red source is
pointing at the remote receiver.
- Make sure there is a clear line of site between the
illuminator and the remote control.
- Check the remote control battery.
Technical Specications
Models
AXIS T90B15 W-LED
AXIS T90B25 W-LED
AXIS T90B35 W-LED
AXIS T90B20 IR-LED
AXIS T90B30 IR-LED
AXIS T90B40 IR-LED
Supported cameras
IR-LED: All Axis cameras with IR cut lter
W-LED: All Axis network cameras
29
ENGLISH