Filter
Top Products
1200 Series IP Video Storage System System Interface | en 7
Bosch Sicherheitssysteme GmbH Installation Manual DOC | V1 | 2010.08
3 System Interface
There are several LEDs on the control panel as well as others on the drive carriers to keep you
constantly informed of the overall status of the system as well as the activity and health of
specific components. The 1200 Series has a power on/off switch, located on the control
panel. This chapter explains the meanings of all LED indicators and the appropriate responses
you may need to take.
3.1 Control Panel Buttons
Power: The main power button is used to apply or remove power from the power supply to
the system. When the power is on, the power button will be lighted by a blue LED. Turning off
the system power with this button will cause the blue LED to turn off and will remove the
main power, but will keep standby power supplied to the system. Therefore, you must unplug
system before servicing the system.
3.2 Control Panel LEDs
The control panel located on the front of the 1200 Series chassis has three LEDs. These LEDs
provide you with critical information related to different parts of the system. This section
1 All-in-One Card Reader
2NIC LED
3 HDD LED
4 OH LED
5 Power Button