IP Camera 200 Series Technical Data | en 101
Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01
10 Technical Data
10.1 Specifications
Input voltage +12 VDC or Power-over-Ethernet
Power consumption 3.6 W (max)
Sensor type ¼-inch CMOS
Sensor pixels 1280 x 800
Sensitivity 0.3 lux
Video resolution 720p, 4CIF/D1, VGA, CIF, QVGA
Video compression H.264 MP (Main Profile); H.264 BP+ (Baseline
Profile Plus); M-JPEG
Max. frame rate 30 fps (M-JPEG rate varies depending on system
loading)
Lens type Varifocal 2.8 to 12 mm, manual iris, F1.4 to 360
Lens mount CS mount
Alarm Input +9 to 30 VDC
Relay Out 24 VAC/VDC, 1 A
Audio Input Built-in microphone, Line in jack connector
Audio Output Line out jack connector
Audio
communication
Two-way, full duplex
Audio compression G.711, L16 (live and recording)
SD card slot Supports up to 32 GB SD/SDHC card