Filter
Top Products
48 en | Advanced Mode IP Camera 200 Series
AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems
6.4.3 Encoder Streams
Select H.264 Settings
1. The codec algorithm for stream 1 is always:
– H.264 MP 720p25/30 fixed
2. Select the codec algorithm for stream 2. The following are
available:
– Copy Stream 1
– H.264 BP+ bit-rate-limited
– H.264 MP SD
3. Select the default profile for each stream from the eight
profiles that have been defined.
Preview >>
Previews of streams 1 and 2 can be shown.
1. Click Preview >> to display a preview of the video for
streams 1 and 2. the current profile is shown above the
preview.
2. Click 1:1 Live View below a preview to open a viewing
window for that stream. Various additional items of
information are shown across the top of the window.
3. Click Preview << to close the preview displays.
Note:
Deactivate the display of the video images if the performance of
the computer is adversely affected by the decoding of the data
stream.
JPEG stream
Set the parmeters for the M-JPEG stream.
– Select the Max. frame rate in images per second (IPS).
– The Picture quality slider allows adjustment of the
M-JPEG image quality from Low to High.
Note:
The M-JPEG resolution follows the highest resolution setting of
either stream 1 or stream 2. For example, if stream 1 is VGA and
stream 2 is QVGA, the JPEG resolution will be VGA. The M-JPEG
frame rate varies depending on system loading.