Filter
Top Products
DINION HD Installation | en 21
Bosch Security Systems Installation Manual AM18-Q0614 | v1.0 | 2012.09
5.3 Network (and power) connector
Figure 5.3 Network connection
– Connect the camera to a 10/100 Base-T network.
– Use STP Category 5e cable with RJ45 connectors (the
camera network socket is Auto MDIX compliant).
– Power can be supplied to the camera via the Ethernet
cable compliant with the Power-over-Ethernet
(IEEE 802.3af) standard.
The LEDs beside the Ethernet connection indicate Power (red),
IP connection (green) and IP traffic (green flashing). They can
be disabled in the Installer menu.
Power is supplied to the camera via the Ethernet cable,
compliant with the Power-over-Ethernet standard.
456456
123123
|
|
12VDC
-+
INSTALL
24VAC
MENU
µSD
E
T
H
-
P
o
E
D
A
T
A
A
L
A
R
M
Ethernet (PoE)
STP Cat 5e
RJ45