Filter
Top Products
DINION HD Install Wizard | en 29
Bosch Security Systems Installation Manual AM18-Q0614 | v1.0 | 2012.09
6.1.1 Adjustment procedure
A monitor must be connected to the video service connector to
use the wizard. (After power-up, wait 20 seconds before
attempting to open the install wizard.)
Figure 6.2 Lens adjustment
1. Briefly press the Menu button to start the wizard.
– You see the following on the monitor screen:
– The lens type is identified and shown on the screen.
– The iris is opened to its maximum value.
2. Manually adjust the focal length on the lens to obtain the
required field of view.
3. Manually adjust the focus on the lens to obtain the
sharpest image possible.
4. To rotate the image 180°, press and hold the Menu button
until the image flips.
Focus
Focal length
Lens type
MBF feedback
Auto MBF 180° MBF info