Filter
Top Products
DinionHD 1080p IP Camera Installation | en 23
Bosch Security Systems Installation Manual AM18-Q0600 | v1.0 | 2011.07
5.4 Power connector
Figure 5.4 Power connection
Connect a SELV-LPS or a SELV Class 2 power supply with a
rated supply voltage of 24 VAC or 12 VDC as follows:
– Use AWG16 to 22 stranded wire or AWG16 to 26 solid
wire; cut back 5 mm (0.2 in) of insulation.
– Connect the earth terminal of the camera to the
system earth of the installation to ensure correct safety
and EMC/RFI protection.
– Loosen the screws of the supplied 2-pole connector and
insert the wires.
– Tighten the screws and insert the 2-pole connector into
the power socket of the camera.
5 mm
456456
123123
|
|
12VDC
-+
INSTALL
24VAC
MENU
µSD
E
T
H
-
P
o
E
D
A
T
A
A
L
A
R
M
Earth