Filter
Top Products
Flush Mount Ceiling Kit Installing the Recessed Camera Mount | en 13
Bosch Security Systems, Inc. Mounting Guide F.01U.126.944 | 1.0 | 2009.04
6. Route the wires from the AutoDome Easy through the slot
in the Recess bracket.
7. Align the three holes on the top of the AutoDome Easy with
the three small holes on the Recess Bracket (item 2,
below).
Figure 2.10 Attach AutoDome Easy to backplate
8. Secure the AutoDome Easy to the Recessed Bracket using
the three M2.5 x 8 mm Phillips Head screws.
9. Remove the three screws securing the Recess Trim Ring to
the Recess Bracket. Set the screws and the Recess Trim
Ring aside.
10. Back the toggle bolts off the support screws until they are
close to the end of the threads.
11. Connect the power and video cables to the AutoDome
Easy. Refer to the AutoDome Operating Instructions for
detailed safety instructions and connection details.