Filter
Top Products
16 en | Installation VIP X1600 B
F.01U.081.492 | V4.0 | 2008.04 Installation and Operating Manual Bosch Security Systems
4.4 Connections
4.4.1 Network
You can connect the VIP X1600 B to a 10/100/1000 Base-T network using a standard UTP
category 5 cable with RJ45 plugs. The Ethernet interfaces can be used to create one or more
redundant connections to the network.
1. Connect the VIP X1600 B to the network via the ETH1 or ETH2 socket.
2. Connect the VIP X1600 B to a redundant switch or hub on the same network via the
second socket.
4.4.2 Direct iSCSI Connection
You can connect the VIP X1600 B directly to an iSCSI system via a free ETH1 or ETH2
interface. This connection is an alternative to using the Ethernet interfaces as a redundant
network connection. Use a UTP category 5 network cable with RJ45 plugs for a direct
connection to an iSCSI system.
i
NOTICE!
You cannot create a connection to a second network.
i
NOTICE!
You can obtain a list of compatible iSCSI systems from your supplier or directly from Bosch
Security Systems. This list is constantly being updated and extended.