Filter
Top Products
16 en | Installation VIP X1600 XF
F.01U.082.088 | V3.5 | 2008.05 Installation and Operating Manual Bosch Security Systems
4.4 Connections
4.4.1 Network
You can connect the VIP X1600 XF to a 10/100/1000 Base-T network using a standard UTP
category 5 cable with RJ45 plugs. The Ethernet interfaces can be used to create one or more
redundant connections to the network.
1. Connect the VIP X1600 XF to the network via the ETH1, ETH2 or ETH3 socket.
2. Connect the VIP X1600 XF to a redundant switch or hub on the same network via a free
ETH1, ETH2 or ETH3 socket.
4.4.2 Direct iSCSI Connection
You can connect the VIP X1600 XF directly to an iSCSI system via a free ETH1, ETH2 or ETH3
interface. This connection is an alternative to using the Ethernet interfaces as a redundant
network connection. Use a UTP category 5 network cable with RJ45 plugs for a direct
connection to an iSCSI system.
i
NOTICE!
You cannot create a connection to a second network.
i
NOTICE!
You can obtain a list of compatible iSCSI systems from your supplier or directly from Bosch
Security Systems. This list is constantly being updated and extended.