Filter
Top Products
98 en | Operation VideoJet X40 SN
DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems
6.3 Saving Snapshots
You can save individual images from the video sequence currently shown on the LIVEPAGE in
JPEG format on your computer's hard drive. The icon for recording single images is only
visible if the unit is configured to enable this process (see Section Allow snapshots, page 44).
You can save snapshots from each of the four cameras in Quad Video view. The icons below
the camera images apply to the four camera images in the following sequence: top left, top
right, bottom left, bottom right.
X Click the icon. The image is saved at a resolution of 704 × 576 pixels (4CIF). The storage
location depends on the configuration of the VideoJet X40 SN (see Section Path for JPEG
and MPEG files, page 44).
6.4 Recording Video Sequences
You can save sections of the video sequence currently shown on the LIVEPAGE on your
computer's hard drive. The icon for recording video sequences is only visible if the unit is
configured to enable this process (see Section Allow local recording, page 44).
You can save video sequences from each of the four cameras in the Quad Video view. The
icons below the camera images apply to the four camera images in the following sequence:
top left, top right, bottom left, bottom right.
1. Click the icon to start recording. The storage location depends on the configuration of
the VideoJet X40 SN (see Section Path for JPEG and MPEG files, page 44). A red dot in the
icon indicates that recording is in progress.
2. Click the icon again to stop recording.
Image Resolution
Sequences are saved at the resolution that has been preset in the configuration for the
encoder (see Section 5.19 Advanced Mode: Encoder Profile, page 48).
i
NOTICE!
You can play back saved video sequences using the Player from Bosch Security Systems,
which can be installed from the product CD supplied (see Section 3.1 Scope of Delivery,
page 11).