Filter
Top Products
28 en | Configuration Using a Web Browser VideoJet X40 SN
DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems
Establishing the Connection
Before you can operate the VideoJet X40 SN within your network, it must have a valid IP
address for your network and a compatible subnet mask.
The following default address is preset at the factory: 192.168.0.1
1. Start the Web browser.
2. Enter the IP address of the VideoJet X40 SN as the URL. The connection is established
and after a short time you will see the LIVEPAGE with the video image.
Maximum Number of Connections
If you do not connect, the unit may have reached its maximum number of connections.
Depending on the unit and network configuration, each VideoJet X40 SN can have up to 25
Web browser connections or up to 50 connections via VIDOS or Bosch Video Management
System.