Filter
Top Products
94 en | Operation VideoJet X40 SN
DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems
Establishing the Connection
Before you can operate the VideoJet X40 SN within your network, it must have a valid IP
address for your network and a compatible subnet mask.
The following default address is preset at the factory: 192.168.0.1
1. Start the Web browser.
2. Enter the IP address of the VideoJet X40 SN as the URL. The connection is established
and after a short time you will see the LIVEPAGE with the video image.