Filter
Top Products
On-screen Manual
>
Changing the Print Quality and Correcting Image Data > Simulating an Illustration
Simulating an Illustration
With the Simulate Illustration function, you can print image data so that it looks like a hand-drawn
illustration. You can add different effects to the original profile and colors.
The procedure for performing Simulate Illustration is as follows:
1.
Open the
printer driver setup window
2.
Set the Simulate Illustration
Check the Simulate Illustration check box on the Effects tab, and adjust the Contrast as necessary.
Moving the slider to the right lightens the image data and moving the slider to the left darkens the
image data.
The current settings are displayed in the Settings Preview on the left side of the printer driver.
3.
Complete the setup
Click OK.
When you execute print, the image will be printed so that it looks hand-drawn.
Important
Because this product supports only monochrome printing, Monochrome Effects appears grayed out
and is unavailable.
Page top
Стр. 51 из 91 стр.Simulating an Illustration