Canon 100 HS Digital Camera User Manual


 
112
You can choose among 4 different image quality settings.
Choose the image quality setting.
z After pressing the m button, press the
op buttons to choose , then press the
m button again.
Choose an option.
z Press the op buttons to choose an
option, then press the m button.
XThe option you set will appear on the
screen.
Image Quality and Shooting Time per Memory Card
Based on Canon’s testing standards.
Recording will automatically stop when the clip file size reaches 4 GB, or when the
recording time reaches approximately 10 minutes when shooting in or , and
approximately 1 hour when shooting in or .
Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 6 or higher memory cards are recommended.
Changing the Image Quality
Image
Quality
Recording Pixels,
Frame Rate
Content
Memory Card Capacity
4GB 16 GB
1920 x 1080 pixels,
24 frames/sec.
For shooting full
high-definition movies.
Approx.
14 min. 53 sec.
Approx.
1hr. 1min.
0sec.
1280 x 720 pixels,
30 frames/sec.
For shooting
high-definition movies.
Approx.
21 min. 23 sec.
Approx.
1 hr. 27 min.
37 sec.
640 x 480 pixels,
30 frames/sec.
The image quality will be
higher when compared
with , but the recording
time will be shorter.
Approx.
46 min. 46 sec.
Approx.
3 hr. 11 min.
32 sec.
320 x 240 pixels,
30 frames/sec.
Since the file size is small,
shooting time will
increase, but the image
quality will decrease.
Approx.
2 hr. 23 min.
41 sec.
Approx.
9 hr. 48 min.
19 sec.
Black bars will appear on the top and bottom of the screen in or .
These areas will not be recorded when shooting.
COPY