Canon 1234B004 Digital Camera User Manual


 
50
Use the self-timer when you want to be in the picture. You can use self-
timer in any Basic Zone mode or Creative Zone mode.
1
Press the <R> button. (9)
2
Select <j>.
While looking at the LCD panel, turn
the <6> dial to select <j>.
3
Focus the subject.
Look in the viewfinder and press the
shutter button halfway to check that
the focus confirmation light <
o
> is on
and the exposure setting is displayed.
4
Take the picture.
Look through the viewfinder and
press the shutter button completely.
X
The beeper will sound, the self-timer
lamp will blink, and the shot will be
taken about 10 sec. later. During the
first 8 sec., the beeper beeps slowly
and the lamp blinks slowly. Then
during the final 2 sec., the beeper
beeps faster and the lamp stays lit.
X During the self-timer operation, the
LCD panel counts down the seconds
until the picture is taken.
j Self-timer Operation
Do not stand in front of the camera when you press the shutter button to
start the self-timer. Doing so will throw off the focus.
Use a tripod when you use the self-timer.
To cancel the self-timer after it starts, press the <R> button.
When using the self-timer to shoot only yourself, use focus lock (p.79) for
an object at about the same distance as where you will be.
You can also silence the beeper. (p.100)