Filter
Top Products
Using Face ID
64
Access the face info screen.
z Read the message that displays, press the
qr buttons to choose [OK], and then press
the m button.
z The face info screen is displayed.
Choose the face info to overwrite.
z Press the opqr buttons to choose the face
info to overwrite, and then press the m
button.
Register face information.
z Follow steps 2 – 3 on p. 58 to shoot, and then
register the new face information.
z Registered faces are more easily recognized
if you add a variety of face information. In
addition to a head on angle, add a slight side
angle, a shot when smiling, and shots inside
and outside.
Access the [Check/Edit Info]
screen.
z Following step 1 on p. 57, choose [Check/
Edit Info] and press the m button.
• You cannot add face information if all 5 information slots are filled. Follow the
steps above to overwrite face information.
• You can follow the above steps to register new face info when there is at least one
slot open, however you cannot overwrite any face information. Instead of
overwriting face info, first erase unwanted existing info (p. 64), and then register
new face information (p. 57) as needed.
Erasing Face Information
COPY