Filter
Top Products
problem occurs repeatedly check and clean the camera hot
shoe, the strobe connectors and wires.
Wires plugs and sockets must be absolutely dry to be working
flawlessly. Water inside the connectors can stop the data
transmission and TTL working mode.
7 PILOT LIGHT
A 3W power LED (11) generates a very bright pilot light. This
light beam of 10° allows an easy and perfect setting of the
flash. The Power LED has an output of about 180lm, equal to a
10W halogen bulb, and a life up to 100k hours. The LED will
never need to be replaced.
The pilot light is switched on with the power switch (1) and can
be set to 2 different light levels
(P1,P2). P1 is the normal one
and P2 the reduced one.
Feature When the flash is connected to a digital camera the
automatic pilot light feature is available. The pilot light turns on
automatically when the camera auto focus system needs more
light to work. By setting set the power switch
(1) to P1 or P2 you
change to permanent pilot light steps as selected.
With CANON digital camera you have to set the AF selector to
S and select the single shooting mode.
With NIKON digital camera you have to set the to AF selector
to – S or M. No automatic function in C.
Important The automatic auto focus assist light will work only
if the AF-illumination is activated in your camera menu. If you
don’t like this function deactivate it simply.
8 S.O.S. SAFETY MODE
For security reasons, to call attention your flash is equipped