Filter
Top Products
N5 SOCKET
Pay attention when plugging it in; hold it at the anti-kink sleeve
of the spiral cord, completely pull the movable nut back and
tenderly press the plug in as soon as tongue and groove click
into place. Then tighten the nut.
Attention If no sync wire is connected, close also the sync
socket (7) with the protection cap.
Due very special positioning of the o-rings both plug in systems
are protected against re- suction of water. Keep all connections
dry. Apply our contact oil regularly, which reduces corrosion
and increases lifetime enormous. Grease all o-rings as usual –
not too much!
11 STANDARD ACCRESSORIES
The flash is supplied with following accessories as standard:
• Exchangeable battery pack
• Power supply
Input: 100-240V~ 1,5A 50/60Hz
Output: 12-14V 1.5A
• Car / boat power adapter
Input ONLY to a 12-14V DC
• Macro protection ring, removable for wide angle shots
• Sync cable
• Protection cap for syncro socket
• Spare parts and maintenance set
• Neoprene bag for the accu pack