Filter
Top Products
with a true S.O.S. function. With the power switch (1) in the
SOS position a true S.O.S. light signal is generated. This
feature can also be used to test the flash.
Attention Use the S.O.S. signal only when really needed and
never use it to discharge the battery.
9 DISPLAY ERROR CODES
If an error is recognized by the micro processor, a code is
shown on the display, an audible alarm is emitted and all the
activities of the flash are stopped. This error information is used
to identify the cause and for security reason.
HI The temperature inside the flash is above 65°C. This
happens if the unit was left in the sun or in a hot place. Allow
the unit to cool down before switching it on again.
10 MAINTANANCE
Rinse your flash using fresh water after every dive in the sea
and dry it carefully. Clean with a mild cleaner and lubricate the
threads regularly.
S6 and N5 sockets require particular care and attention. Make
sure that the contacts are given regular inspection that the
plugs are clean and o-rings slightly lubricated.
S6 SOCKET
The S6 plug is a very safe and sturdy plug in system. Its
contact system is very precise and secure, combined with a 4
time o-ring sealing system which is easy to maintain. Plug in –
tighten the nut – ready to go!