Filter
Top Products
120
ShootingN
Each time you press the <B> button, the information display will
change.
About the Information Display
Magnifying frame
Histogram
ISO speed
Shots remaining
Exposure level
AEB range
Aperture
Shutter speed
AE lock
Picture Style
Battery check
Flash-ready
Drive mode
Live View exposure simulation
White balance
Image-recording quality
Flash exposure compensation
AF mode
AF point
(Quick mode)
AEB
FEB
Highlight tone priority
About the <E> icon
If Live View shooting is done under direct sunlight or other high-temperature
environments, the <
E
> icon (warning for the camera’s high internal
temperature) may appear on the screen. If Live View shooting continues with
a high internal temperature, it may degrade image quality. You should
therefore stop Live View shooting if the warning icon appears.
If you use a hard disk-type card and Live View shooting continues while the
<
E
> warning icon is displayed, the camera’s internal temperature will
further increase and the Live View shooting will stop automatically. Live View
shooting will be disabled until the camera’s internal temperature decreases.
The histogram and <g> icon are displayed when [Exposure
simulation] has been set to [Enable] (p.117). If <g> is blinking, it
indicates that the Live View image is not being displayed at the suitable
brightness due to low or bright light conditions. However, the captured
image will reflect the exposure setting.
If flash is used or bulb is set, the <g> icon and histogram will be
grayed out (for your reference). The histogram might not be properly
displayed in low light or bright light conditions.
C OPY