Filter
Top Products
Recording
80
3
Onscreen Markers and Zebra Patterns
4 Select a zebra level and then press SET.
5 Press the ZEBRA button to activate the selected zebra pattern.
• You can also select [Zebra], select [On] and then press SET.
NOTES
• You can use the [M LCD/VF Setup] [HD Output] setting (0 165)
to display the zebra pattern on an external monitor connected to the
HD/SD SDI terminal (b only), HDMI OUT terminal or HD/SD
COMPONENT OUT terminal (HD output only).
• When the HD/SD SDI terminal (b only) or HD/SD COMPONENT
OUT terminal is set to output a standard definition signal, the output will
temporarily switch to a high definition signal while the zebra pattern is
displayed if you set [HD Output] to [On].