Filter
Top Products
82
1
2
3
4
5
6
7
8
Cover
Preliminary Notes and
Legal Information
Contents:
Basic Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
Playback Mode
4 Close the cover.
Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position (
).
5 Connect the power cord.
Insert the adapter plug into the end of the
coupler cable.
Insert one end of the power cord into the
compact power adapter, and then plug
the other end into a power outlet.
Turn the camera on and use it as desired.
When nished, turn the camera off and
unplug the power cord from the outlet.
•Do not disconnect the adapter or unplug the power cord while
the camera is still on. This may erase your shots or damage the
camera.
•Do not attach the adapter or adapter cord to other objects. Doing so
could result in malfunction or damage to the product.
Still Images Movies
Powering the Camera with Household Power
Powering the camera with AC Adapter Kit ACK-DC90 (sold separately)
eliminates the need to monitor the remaining battery level.
1 Make sure the camera is off.
2 Open the cover.
Follow step 2 in “Inserting the Battery
and Memory Card” (=
11) to open
the memory card/battery cover, and then
open the coupler cable port cover as
shown.
3 Insert the coupler.
Insert the coupler facing the direction
shown, just as you would a battery
(following step 3 in “Inserting the Battery
and Memory Card” (=
11)).
Make sure the coupler cable passes
through the port.
Terminals
Coupler Cable Port