Canon A420 Digital Camera User Manual


 
61
Playback/Erasing
It may take approximately 3 minutes to save an edited movie.
If the battery runs out of charge partway through, edited movie
clips cannot be saved. When editing movies, it is
recommended that you use two new size-AA alkaline
batteries, two fully charged size-AA NiMH batteries, or the
separately sold AC Adapter Kit ACK800 (p. 90).
2
Use the S or T button to select (Cut
Beginning) or (Cut End) and the W or X
button to specify the point ( ) at which to
cut.
zTo check a temporarily edited movie, select (Play) and
press the FUNC./SET button.
zSelecting (Exit) cancels the edit and restores the movie
control panel.
3 Select (Save) and press the FUNC./SET
button.
4
Select [New File] or [Overwrite] and press
the FUNC./SET button.
z[New File] saves the edited movie
under a new file name. The pre-
edit data is left unchanged.
Note, if you press the FUNC./SET
button while saving the movie,
saving is canceled.
z[Overwrite] saves the edited
movie with its original name. The pre-edit data is lost.
zWhen there is not enough space left on the memory card,
only [Overwrite] can be selected.