Filter
Top Products
155
Troubleshooting
Subject in recorded image is too bright, or image
flashes white.
Subject is too close,
making the flash too
strong.
zShoot within correct flash range of the
subject when using the built-in flash
(p. 188).
zAdjust the flash output with the flash
exposure compensation function
(p. 86).
zSet the safety FE to [On] (p. 86).
The subject is
overexposed because the
surroundings are too dark.
zSet the exposure compensation to a
negative (–) setting (p. 99).
zUse the spot metering function
(p. 100).
Too much light is shining
directly into the camera, or
is being reflected off the
subject.
zChange the shooting angle.
Flash is set to (Flash
on).
zSet the flash to (Flash off) (p. 60).
Image contains noise.
ISO speed is too high. zHigher ISO speeds and (High ISO
Auto) setting may increase image
noise. For higher image quality, use
as low an ISO speed as possible
(p. 68).
zIn , , and mode in the
mode, the ISO speed increases
and noise can appear.
COPY