Filter
Top Products
68
Changing the Save Method for the
Original Image
When you are shooting still images in the Color Accent or
Color Swap mode, you can specify whether or not both the
altered image and the original image are recorded.
1
(Rec.) Menu [Save Original] [On]/
[Off]*.
See Menus and Settings (p. 19).
*Default setting.
zIf [On] is selected, the two
images will be numbered
consecutively with the altered
image following the original.
When [Save Original] is Set to [On]
- Only the color accent or color swap-altered image is
shown in the LCD monitor during shooting.
- The image that appears in the LCD monitor
immediately after recording is the altered image shot
with the color accent or color swap setting. If you
erase the image at this point, the original image is
erased along with the altered image. Exercise
adequate caution before deleting an image.
- Since two images are recorded with each shot, the
number of shots remaining is approximately half the
number displayed when this function is set to [Off].