Filter
Top Products
83
Playback/Erasing
2
Use the or button to select (Cut
Beginning) or (Cut End) and the or
button to specify the cut point ( ).
zTo check a temporarily edited movie, select (Play) and
press the FUNC./SET button.
zSelecting (Exit) cancels the edit and restores the movie
control panel.
3
Select (Save) and press .
4
Select [New File] or [Overwrite] and press
.
z[New File] saves the edited movie
under a new file name. The pre-edit
data is left unchanged. Note, if you
press the FUNC./SET button while
saving the movie, saving is cancelled.
z[Overwrite] saves the edited movie
with its original name. The pre-edit data is lost.
zWhen there is not enough space left on the memory card,
only [Overwrite] can be selected.
It may take approximately 3 minutes to save an edited movie.
If the batteries run out partway through, edited movie clips
cannot be saved. When editing movies, it is recommended to
use new AA-size alkaline batteries or fully charged AA-size
NiNH batteries (sold separately) or the AC Adapter Kit
ACK600 (sold separately) (p. 119).