Filter
Top Products
78
Other Camcorder Settings
Beep
You will hear a beep upon camcorder operations such as power on/off, start/stop, self-
timer countdown, and unusual conditions of the camcorder.
If you turn off the beep, all camcorder sounds including the ones of the My Camera
settings will be turned off.
To turn the beep off, open the menu and select [SYSTEM]. Select [BEEP],
set it to [OFF] and close the menu.
Turning Off the Tally Lamp
The tally lamp indicates that the camcorder is recording, receiving signals from the
wireless controller or counting down for the self-timer. However, the flashing may be
reflected in the lens when recording close-ups or through glass, and you may
therefore decide to turn it off.
Open the menu and select [SYSTEM]. Select [TALLY LAMP], set it to [OFF]
and close the menu.
The tally lamp still lights up when the camcorder receives a signal from the wireless
controller, or during self-timer countdown.
Adjusting the Brightness of the LCD Screen
Open the menu and select [DISPLAY SETUP/ ]. Select [BRIGHTNESS],
adjust the brightness level and close the menu.
Changing the brightness of the LCD screen does not affect that of the viewfinder
or the recordings.
CARD PLAY
CARD CAMERA
PLAY (VCR)
CAMERA
CARD PLAY
CARD CAMERAPLAY (VCR)
CAMERA
CARD PLAY
CARD CAMERAPLAY (VCR)
CAMERA
BEEP•••••••••ONSYSTEM
( 35)
SYSTEM
TALLY LAMP•••ON
BRIGHTNESS•••
–+
DISPLAY SETUP/
( 35)
( 35)