Filter
Top Products
63
Shooting
3
Aim the camera so that the original color
appears at the center of the LCD monitor
and press the button.
!Only one color can be specified.
!You can use the or button to specify the range of
colors that are swapped.
4
Aim the camera so that the desired color
appears at the center of the LCD monitor
and press the button.
!Only one color can be specified.
5
Press to comlete the setting, then shoot.
!The default setting for color swap mode will change green
into white.
!You may not obtain the expected results if you use the flash.
!The colors specified in the color swap mode are retained
even if the camera’s power is turned off.
–5: Only takes the color that you want to swap.
+5: Also takes colors close to the one that you want to swap.